ON THE DYNAMICS OF THE COMBUSTION OF SINGLE CHAR PARTICLES

Diffusion and reaction models of varying complexity are used to study the stability of the combustion of single char particles. In contrast to past studies which have considered only the reaction of carbon with oxygen, both the heterogeneous reactions of carbon with oxygen and carbon dioxide and the homogeneous oxidation of carbon monoxide are taken into account in the formulation of the mathematical models. Emphasis is placed on the investigation of the feasibility of occurrence of oscillatory combustion. Our results show that high rates of the C-O₂ reaction and high concentration of O₂ in the ambient favor the occurrence of multiple steady states and oscillatory solutions, but the appearance of oscillatory instability is suppressed by the homogeneous reaction in the gas phase and the presence of CO and CO₂ in the ambient. The parametric investigation of the problem reveals, in agreement with the results of past studies, that the heat capacity of the porous solid, the Lewis number, and the thickness of the stagnant film are three key parameters for the occurrence of the oscillatory response of the system. Reasonably large values of solid heat capacity practically eliminate the possibility of oscillatory combustion, but an appropriate combination of large values of stagnant film thickness and small Lewis numbers may offset the effect of solid heat capacity     

聚氯乙烯中杂质粒子的产生原因及解决措施

通过分析聚氯乙烯树脂中杂质粒子产生的主要原因，提出了在采购、保管、生产、清理、分析等环节的解决措施。     

PVC树脂中杂质粒子的来源及消除方法

系统地分析了PVC树脂中杂质粒子的来源和产生原因，提出了解决的方法。杂质粒子与所用原材料、设备、工艺、聚合配方组分及氯乙烯单体中的铁化合物有关。在配方中全用聚乙烯醇做悬浮剂时由于反应前后浓度变化大而容易产生自聚物和粘釜物而增加杂质粒子，加入少量纤雏素可稳定悬浮剂浓度。单体含酸含水所产生的铁锈与氯化铁形成有色胶状物是杂质粒子的重要来源，采用在合成工段滴加碱溶液的方法消除酸和氯化铁，避免胶状物的产生。     

溶液中钙离子对玻璃颗粒电泳沉积的影响

研究了玻璃颗粒在乙醇溶液中对Ca^2 的选择吸附，反转了玻璃颗粒在乙醇中的荷电性质，使玻璃颗粒能够在乙醇中与羟基磷灰石发生共沉积。讨论了不同离子浓度下电泳沉积的沉积量与沉积电流的变化情况，并以此对Ca^2 在电泳沉积中的作用进行了分析。实验结果证实：悬浮液中Ca^2 或吸附到玻璃颗粒上，改变其荷电性质；或留在溶液中，作为电泳沉积过程中电流的主要承载者。离子浓度对电泳沉积的效果有重要的影响，离子浓度太低或太高都易使涂层出现缺陷。分析了不同沉积条件下电泳沉积所得涂层的各种缺陷及其成因。     

基于模板法制备两亲性Janus纳米粒子及其应用进展

Janus粒子是同一粒子中含有两种不同化学组成的非对称结构,其中两亲性Janus粒子是在对立面分别含有亲水基、疏水基两种不同化学基团,作为一种新型纳米材料受到广泛的关注。该文综述了模板法制备不对称结构的两亲性Janus粒子以及其应用领域,包括硬模板法、软模板法、牺牲模板法以及无模板法;综述了两亲性Janus粒子在表面活性剂、牙科粘合剂、微胶囊、功能涂层、催化剂以及生物传感器等方面的研究进展。     

工艺因素影响焦炭颗粒耐压强度的试验研究

焦炭颗粒的耐压强度一直是焦炭颗粒最重要的性质之一。利用最近提出的表征焦炭颗粒耐压强度的新方法，就模压压力、加压方式、粒度组成范围、粒度大小、粒度配比等因素对单粒度或多粒度组成焦炭颗粒耐压 强度的影响进行了较为详细的试验研究。结果表明：（1）焦炭颗粒的粒度大小和粒度范围均可用其原始平均细度来表征。焦炭颗粒的原始平均细度越大，其耐压强度系数也就越高；（2）多粒度组成焦炭颗粒混合料的耐压能力比单粒度组成混合料的耐压能力要高得多。对多粒度组成焦炭颗粒而言，模压压力及粒度组成配比对其耐压强度系数的影响不甚明显；（3）分阶段缓慢加压到位比一次快速加压到位有利于提高焦炭颗粒的耐压强度系数。     

纳米二氧化钛制备方法研究

目前制备纳米二氧化钛粒子的方法很多,在总结归纳的基础上对各种制备方法所具有的特点进行比较,并指出了其优缺点和适用范围以及相关的研究进展.     

聚合物乳液的稳定性

简要讨论了乳液稳定性的原理,综述了乳液配方、乳胶粒组成和结构对聚合物乳液电解质稳定性、机械稳定性、冻融稳定性和贮存稳定性的影响。     

Discrete-continual model of flame propagation in a gas suspension of metal particles. I. One-dimensional approximation

Experimental data on combustion of magnesium particles in oxygen-containing gas mixtures are analyzed and generalized, which allowed us to develop a semi-empirical mathematical model that takes into account the integral effect of the initial particle size, pressure, and velocity of the oxidizing flow on combustion. Flame propagation in an air suspension of fine magnesium particles is considered in a one-dimensional approximation. For this purpose, a discrete-continual model of flame propagation in a gas suspension of metal particles is developed. The flammability limits in a vessel, caused by heat losses into the ambient medium and by spatial nonuniformity of the distribution of disperse-phase particles, are numerically determined, and the influence of nonuniformity and bidispersion of a one-dimensional ensemble of particles on flame characteristics is studied.__________Translated from Fizika Goreniya i Vzryva, Vol. 41, No. 2, pp. 81–93, March–April, 2005.     

分流叶片对离心泵内部固液两相流的影响

为了研究分流叶片对离心泵内部固液两相流的影响,建立固液两相流模型,对无分流叶片离心泵和3种带分流叶片的离心泵进行全流道非定常数值模拟。重点分析了添加分流叶片对离心泵外特性、叶片表面压力脉动、叶片表面颗粒体积分数分布、叶片表面颗粒滑移速度的影响。分析结果表明:添加分流叶片以后,离心泵的扬程和效率均有显著的提高,叶片表面的颗粒分布更加均匀,叶片表面颗粒的滑移速度有不同程度的下降,使颗粒对叶片表面的磨损程度得以降低;当分流叶片的进口直径为0.65D2时,叶片出水边处的压力脉动幅值最小,减小了离心泵在运行过程中的振动和噪声。